beautypg.com

3 usb device connection (single connector), Figure 5-19: vga connector – IEI Integration PCISA-9652 v1.01 User Manual

Page 119

background image

PCISA -9652 Half-Size CPU Card

Page 99

Figure 5-19: VGA Connector

Step 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

Step 0:

5.7.3 USB Device Connection (Single Connector)

There are two external USB 2.0 connectors. Both connectors are perpendicular to the

PCISA-9652. To connect a USB 2.0 or USB 1.1 device, please follow the instructions

below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 4.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCISA-9652. See Figure 5-20.

See also other documents in the category IEI Integration Hardware: