IEI Integration PCISA-9652 v1.01 User Manual
Page 158

PCISA-9652 Half-Size CPU Card
Page 138
Disabled
Overlapped PCI memory cannot be remapped
Enabled D
EFAULT
Overlapped PCI memory can be remapped
Memory Hole [Disabled]
Use the Memory Hole option to reserve memory space between 15MB and 16MB for ISA
expansion cards that require a specified area of memory to work properly. If an older ISA
expansion card is used, please refer to the documentation that came with the card to see if
it is necessary to reserve the space.
Disabled D
EFAULT
Memory is not reserved for ISA expansion cards
15MB – 16MB
Between 15MB and 16MB of memory is reserved for
ISA expansion cards
Boots Graphics Adapter Priority [IGD]
Use the Boots Graphics Adapter Priority option to select the graphics controller used as
the primary boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Configuration options are listed below:
IGD
D
EFAULT
PCI/IGD
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1MB
1MB of memory used by internal graphics device
Enable, 8MB
D
EFAULT
8MB of memory used by internal graphics device