Warner Electric X2DRV - Manual (Page 2)

2 Warner Electric • +33 (0) 2 41 21 24 24 P-2098-WE-A4
INTRODUCTION:
The X2DRV is a solid state electronic control that will accept a variety of input signals and provides to the brake
an output current and voltage proportional to the input. This double channel driver can be operated by a remote
potentiometer, a voltage or a current loop input.
The X2DRV is a 24VDC double channel driver, 4Amps current capability.
When associated with an XCTRL, power supply, Input and (Communication) will be made by the internal connector.
This manual has been designed to cover the full range of installation, start-up and operation of your tension control
system.
Figure 1: X2DRV housing dimensions
RATINGS: