Warner Electric P 130 VAR00_VAR02 - Manual (Page 2)

2 Warner Electric Europe • +33 (0)2 41 21 24 24 P-2081-WE • 2/13
We, WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex
declare that clutches made in our factory from St Barthélemy d’Anjou,
and hereafter designated : P 130 VAR00/VAR02
are designed to be incorporated into an
installation or assembled with other equipment
in order to form a machine that is covered by
directive 98/37/EC.
St Barthélemy d’Anjou, July 2002
Eric Prat, General Managing Director
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions 3
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Setting up 3
4 Maintenance 3
4.2 Spare Parts 4
4.3 Dismantling / Reassembling 4
5 Pneumatic connection 4
5.1 Important recommendations 4
5.2 Connection diagrams 5
6 Appendix 5
6. 1 Drawings / Description 5
7. Troubleshooting 5
2 Precautions and restrictions on use
2.1 Restrictions on use
These clutches are designed to run dry. Any oily
material alters their performance.
Exceeding the maximum rotation speed given in
the catalogue invalidates the warranty.
These clutches are designed solely to run
on a horizontal shaft. Ask our technical
department about other positions.
1 Technical Specifications
Symbol designating
an action that might
damage the brake Symbol designating an
action that might be
dan gerous to human safety Symbol designating an
elec trical action that might be
dangerous to human safety