Warner Electric CB & Super CB Series Wrap Spring Clutches & Brakes - Manual (Page 7)

Warner Electric Europe • +33 (0)2 41 21 24 24 P-2026-WE • 11/12 7
4 LUBRICATION
All standard clutches and clutch brakes are manufactured from sintered metal components, which have been
impregna ted with bearing infusion oil for permanent lubrication. In cases where there is severe duty or the
environment is such that oil may “wickout” or foreign materials have got into the unit, the unit may be re-oiled or
flushed out with minimal or no disas sembly by using Shell Bearing infusion Oil 33.
If disassembly of the unit is necessary, follow the detailed disassembly instructions to the point needed, flush and
wipe parts in the oil to be used for re-lubrication.
DO NOT USE SOLVENT to clean sintered metal parts. To get more
cleaning action from the oil, it may be heated while cleaning the components. Parts must be brought back to ambient
temperature by submerging in cool oil.