Warner Electric E320 - Manual (Page 2)

2 Warner Electric Europe • +33 (0)2 41 21 24 24 P-2035-WE • 2/13
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions in use 3
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Installing 3
3.3.1 Installing VAR00/04/10/14 3
3.3.2 Installing VAR504 3
3.3.3 Installing VAR05 4
4 Maintenance 4
5 Electrical connection 4
5.1 Important recommendations 4
5.2 Power supply 4
6 Appendix 5
6.1 Drawings / Part numbers 5-6
We: WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex declare
that the clutches made in our factories from St Barthélemy d’Anjou, and hereafter designated : E320
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of the
product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 98/37/EC and if electric to the
EMC directive 89/336 /EEC.
The conformity of the electric units to the Low Voltage directive 72/23 (modified) is supported by the full respect of the following standards : NFC
79300 and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, july 2002 E.
PRAT, General Managing Director
Size 20 50 100 200 400 800 1600
N max. VAR00 min -1 5000 5000 4300 3600 3300 2700 2100
N max. VAR04/05 min -1 - 3900 3500 2800 2600 2100 1500
Dimension J
±0.1
mm 0.3 0.4 0.5 0.5 0.5 0.6 0.7
Weight VAR04/10/14 kg 1 1.2 2 3 4 7 14
Coupling - - 28/38 38 42 48 55 75
Dimension E VAR05 mm - 20
+1.5/0
24
+1.8/0
26
+2/0
28
+2.1/0
30
+2.2/0
40
+3/0
Weight VAR05 kg - 2,5 4.5 6.8 8.3 15.5 31
WARNER ELECTRIC EUROPE - Rue Champfleur, B.P. 20095, F - 49182 St Barthélemy d’Anjou Cedex SM309gb- rev 11/04 2/6
We, WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex
declare that the clutches made in our factories from St Barthélemy d’Anjou,
and hereafter designated: E320
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of the
product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 98/37/EC and if electric to
the EMC directive 89/336 /EEC.
The conformity of the electric units to the Low Voltage directive 72/23 (mofified) is supported by the full respect of the following standards :
NFC 79300 and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, July 2002
E. PRAT, General Managing Director
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions in use 3
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Installing 3
3.3.1 Installing VAR00/04/10/14 3
3.3.2 Installing VAR504 3
3.3.3 Installing VAR05 4
4 Maintenance 4
5 Electrical connection 4
5.1 Important recommendations 4
5.2 Power supply 4
6 Appendix 5
6.1 Drawings / Part numbers 6
1 Technical specifications
NB: Data for catalogue equipment.
2 Precautions and restrictions on use
2.1 Restrictions on use
VAR00/10 units are designed for operation in oil
(not sealed bearings).
VAR04/14 and VAR05 are designed for dry
operation (sealed bearings).
Exceeding the maximum rotation speed listed in
the catalogue will invalidate the guarantee.
The suitable ambient temperature for these units is
max. 40°C (Insulation class of 155°C).
E320 clutches are designed for horizontal
mounting. Consult our technical services if other
mounting positions are required.
Size 3200 6400 12800 25600
N max. VAR00 min -1 1800 1500 1500 1200
N max. VAR04/05 min -1 1400 1000 - -
Dimension J ±0.1 mm 0.8 1 1 1
Weight VAR04/10/14 kg 29.5 82 145 254
Coupling - 90 125 - -
Dimension E VAR05 mm 45
+3.4/0
60
+4.6/0
- -
Weight VAR05 kg 61 161 - -
Table 1
NB: Data for catalogue equipment.
2 Precautions and restrictions on use
2.1 Restrictions on use
VAR00/10 units are designed for operation in
oil (not sealed bearings).
VAR04/14 and VAR05 are designed for dry
operation (sealed bearings).
Exceeding the maximum rotation speed listed
in the catalogue will invalidate the guarantee.
The suitable ambient temperature for these
units is max. 40°C (Insulation class of 155°C).
E320 clutches are designed for horizontal
mounting. Consult our technical services if other
mounting positions are required.
Symbol designating
an action that might
damage the brake Symbol designating an action
that might be dan gerous to
human safety Symbol designating an
elec trical action that might be
dangerous to human safety