Warner Electric E220 Electromagnetic Single Disc - Manual (Page 2)

2 Warner Electric Europe • +33 (0)2 41 21 24 24 P-2033-WE • 2/13
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions 2
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Installing 3
3.3.1 Installing VAR00 and VAR02 3
3.3.2 Installing VAR05 4
4 Maintenance 4
4.1 Maintenance 4
4.2 Spare parts 4
5 Electrical connection 5
5.1 Important recommendations 5
5.2 Power supply 5
6 Appendix 6
1 Technical specifications
Size 200 400 800 1600 3200 6400 12800
N max. (VAR00) tr/min 2600 2000 1700 1500 1500 - -
N max. (VAR02) tr/min - 3000 2500 2200 1800 1500 1500
Travel P mm 0.5
±0.1
0.5
±0.1
0.6
±0.1
0.8
±0.1
0.8
±0.1
1
±0.1
1
±0.1
Max. travel mm 1 1.2 1.4 1.7 1.8 2.2 2.8
Coupling 55 65 75 90 100 125 180
Dimension E VAR05 mm 30 +2.20/0 35 +2.6/0 40 +3/0 45 +3.6/0 50 +3.6/0 60 +4.6/0 85 +6.4/0
Flange-screws (528) (VAR05) M8 x 20 M8 x 20 M10 x 25 M12 x 25 M16 x 25 M16 x 40 M20 x 40
Tightening torque Nm 22
±2
22
±2
44
±4
76
±8
189
±18
189
±18
370
±37
Weight (VAR00, 02) kg 20 25,5 35,2 61 122 220 380
Weight (VAR05) kg 27,4 31,5 50,5 85,5 158 298 597
WARNER ELECTRIC EUROPE - Rue Champfleur, B.P. 20095, F - 49182 St Barthélemy d’Anjou Cedex SM310gb - rev 11/04 2/6
We: WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex
declare that the clutches made in our factories from St Barthélemy d’Anjou,
and hereafter designated : E210 and E220
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of the
product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 98/37/EC and if electric to
the EMC directive 89/336 /EEC.
The conformity of the electric units to the Low Voltage directive 72/23 (modified) is supported by the full respect of the following standards :
NFC 79300 and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, july 2002
E. PRAT, General Managing Director
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions 2
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Installing 3
3.3.1 Installing VAR00 and VAR02 3
3.3.2 Installing VAR05 4
4 Maintenance 4
4.1 Maintenance 4
4.2 Spare parts 4
5 Electrical connection 5
5.1 Important recommendations 5
5.2 Power supply 5
6 Appendix 6
1 Technical specifications
NB : data for catalogue equipment
2 Precautions and restrictions on use
2.1 Restrictions on use
This equipment is designed for dry running. Any
oily material alters performance.
Exceeding the maximum speed of rotation stated
in the catalogue invalidates the warranty.
This equipment is designed for a maximum ambient
temperature of 40° (155°C casing class).
E210 and E220 clutches are designed to operate
with centreline horizontal. Vertical fitting is possible
only for VAR00.
2.2 Precautions in use and safety measures
During maintenance, ensure that the machine’s
moving parts are stationary and that there is no
risk of accidental start-up. All intervention have to be made
by qualified personnel, owning this manual.
Any modification made to the brake without the
express authorisation of a representative of Warner
Electric, in the same way than any use out of the contrac-
tual specifications accepted by "Warner Electric", will result
in the warranty being invalidated and Warner Electric will
no longer be liable in any way with regard to conformity.
Table 1
NB : data for catalogue equipment
2 Precautions and restrictions on use
2.1 Restrictions on use
This equipment is designed for dry running.
Any oily material alters performance.
Exceeding the maximum speed of rotation
stated in the catalogue invalidates the warranty.
This equipment is designed for a maximum
ambient temperature of 40° (155°C casing
class).
E210 and E220 clutches are designed to
operate with centreline horizontal. Vertical
fitting is possible only for VAR00.
2.2 Precautions in use and safety measures
During maintenance, ensure that the machine’s
moving parts are stationary and that there is no
risk of accidental start-up. All intervention
have to be made by qualified personnel,
owning this manual.
Any modification made to the brake without
the express authorization of a representative of
Warner Electric, in the same way than any use
out of the contrac tual specifications accepted
by “Warner Electric”, will result in the warranty
being invalidated and Warner Electric will
no longer be liable in any way with regard to
conformity.
We: WARNER ELECTRIC EUROPE, 7, rue Champfluer, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex declare that the clutches made in our
factories from St Barthélemy d’Anjou,
and hereafter designated: E210 and E220
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of the
product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 98/37/EC and if electric to the
EMC directive 89/336/EEC.
The conformity of the electric units to the Low Voltage directive 72/23 (modified) is supported by the full respect of the following standards: NFC
79300 and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, july 2002
E. PRAT, General Managing Director