Vanguard RFD-200 S2 - Manual (Page 6)

RFD-200 S2 USER’S MANUAL REV 2
3
RFD-200 S2 Ampere Meters
The test current is displayed on the unit’s back-lit LCD screen that is viewable in both bright
sunlight and low-light levels. The current measuring range is from 0.00 to 250 A. A second
ampere meter is also available and can be used to read an external current input. The external
current input is rated at 6A max and is protected by a circuit-breaker.
RFD-200 S2 Volt Meter
One volt meter input (0 to 600 V input range) is available on the RFD-200 S2. This input uses the
true RMS for AC measurement method.
1.2 Furnished Accessories
The MCCB-250 comes furnished with the following:
• One power cord
• One set of 8-foot current cables
• One 8-foot timer start cables
• One 8-foot timer stop cables
• One 8-foot voltage cables
• One ground cable
• One cable carrying duffel bag