Vanguard VCBA S2 (DigiTMR S2, DigiTMR S2 PC, CT-6500 S2, CT-7000 S2, CT-7500 S2, CT-8000) User Manual

Page 24

VCBA S2 VERSION 4.xx SOFTWARE MANUAL

REV 3

4.5

Customizing the Items Displayed on the Graph

You can select which contact, travel, and voltage traces are displayed on each page of the
graphic test results. To select the items to be displayed:

1. Click on the Channel Setup icon in the Graph command group in the Command Ribbon.

The following window will be displayed:

2. First, select the page number that you would like to customize by clicking on the

corresponding radio box at the top of the window.

3. From each section, select the channels that you would like to display on the graph by

selecting the channel number from the corresponding drop down menu. In the example
above, contact channels 1, 2, and 3 will be displayed on the graph, voltage channel 1 will
be displayed, current channel 1 will be displayed, and travel channels 1, 2, and 3 will be
displayed.

4. Repeat the above process for additional pages, and then click on the “OK” button. The

graph view will be updated to reflect any changes made.

NOTE

The order of the contact and voltage channels can be arranged in any order by
the user. This is determined by how they are selected from the dropdown
menus. For example, if contact #3 is selected from the first dropdown menu, it
will appear as the first item at the top of the graph.