Vanguard CT-6500 - Manual (Page 53)

CT-6500 Operating Instructions
46
9.13 Set CT-6500 Internal Clock
The CT-6500 has an internal clock with a lithium battery. The clock's time and date is
displayed on the LCD screen. When a timing shot is stored in the EEPROM, the time and date
are also stored along with the shot. To set the clock, perform the steps in the following Table 18.0.
Table 18.0 Setting the Clock and Calendar
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS # 3 KEY. 1. ANALYSIS POINT
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT NEXT PAGE. PRESS # 4 KEY. 1. SHOT DESCRIPTION
2. COMPUTER ITF
3. SET CLOCK
4.SET PRINT MODE
3 SELECT SET CLOCK. PRESS # 3 KEY. TIME: HH:MM:00
XX:YY:00
4 ENTER HOURS AND MINUTES. PRESS KEYS 0-9. TIME: HH:MM:00
XX:YY:00
DATE: MM/DD/YY
XX/YY/ZZ
5 ENTER MONTH, DATE, YEAR. PRESS KEYS 0-9. TIME: HH:MM:00
XX:YY:00
DATE: MM/DD/YY
XX/YY/ZZ
6 RETURN TO MAIN MENU. NO ACTION. 1. TIME BRKR
2. GET RSLT
3. SET UP
4. DIAGNOSTIC
NOTE
1. The clock battery is good for three years.
2. Loosing the clock battery will not affect the CT-6500’s performance.