Vanguard CT-6500 - Manual (Page 14)

CT-6500 Operating Instructions
7
6.0 CT-6500 Analyzer Specifications
CONTACT TIMING Open, Close, Open-Close, Close-Open, and Open-Close-Open
SIZE & WEIGHT 16d by 14w by 11h (inches), less than 32 pounds
OPERATING POWER 2 Ampere, 90-120 Vac / 200-240 Vac 50/60 Hz
TIMING WINDOW Selectable between: 1, 10, or 20 second
RESOLUTION ±100 microseconds at 1 second duration
±1.0 millisecond at 10 second duration
±2.0 millisecond at 20 second duration
DRY-CONTACT INPUT 3 or 6 or 12 contact channels. All contact inputs are grounded until testing
is started. Each contact detects main and insertion resistor contacts.
CONTACT RESISTANCE CLOSED: less than 20 Ohms
OPEN: greater than 10,000 Ohms
INSERTION RESISTANCE Ranges from 10 to 7,000 Ohms
TRIGGER INPUT Open/Close: 30 to 300 Vdc, peak Vac
VOLTAGE INPUTS 2 voltage inputs, sensitivity ranging from 1.0 to 300 Vdc, peak Vac
Analog voltage recording ranges from 1.0 to 255 Vdc
CURRENT-SENSOR INPUT 1 non-contact, hall-effect sensor ranging from 0.2 to 20 Amperes, DC to 5 kHz
BREAKER INITIATE Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open
TRAVEL TRANSDUCER 3 travel-transducer channels, linear motion from 0.0 to 60.0 inches (±0.01) inch
INPUT Rotary ranges from 0 to 360
o
(± 0.36º).
BREAKER SLOW-CLOSE
TEST
Measures the contact point distance.
BREAKER ANALYSIS Windows 95, 98, 2000, NT, XP compatible.
SOFTWARE (included) The analysis software can be installed on a IBM-compatible computer for graphical
display, numerical reports and database utility for office use.
COMPUTER INTERFACE RS-232C Port
DISPLAY Backlit LCD screen, 4-lines by 20-characters, sunlight viewable
HARD-COPY PRINTOUT Contact travel waveforms and tabulated results printout on 4.5 inch thermal paper.
CARRYING CASE (optional) Hard shipping case for CT-6500 and cables.
Hard shipping case for Travel Transducers.
WARRANTY One year warranty on parts and labor. Post-warranty service contracts available.