TREND IQView.._SM - Manual (Page 5)

2 - 1 IQView../SM Installation Instructions TG200711 Issue 1/E 10/08/06
2
Installation Instructions - Sheet 2
IQView../SM
Surface Mount Touch Screen Display
Mount Unit
9
IQVIEW../SM
Installation Instructions -
Sheet 1
1
Connect RS232 10
only connection for IQView Mono,
if required for IQView (standard version)
IQ1xx or CNC with 25 Way D type female
IQ3, IQ2xx, (some IQ1xx with RJ11)
IQ1xx with 5 in line plug
IQ3xcite,
IQ2xx, IQ1xx
IQ1xx, CNC
IQ1xx
IQView
IQView IQView
RJ11
CABLE/EJ105650
(supplied with IQView Mono, not IQView standard
version)
RJ11
RJ11
CABLE/EJ105651
25 way
D male
RJ11
CABLE/EJ105651
CABLE/78-1772
(additional)
5 in line socket
Connect Ethernet 11
if required, and if not connected to RS232 as in step 10
100-240 V
OK RX
100 m
(max)
RJ45 e.g.
RJ45 PLUG UPT/10 (UTP)
RJ45 PLUG FTP/10 (FTP)
(packs of 10)
Cat 5e twisted pair e.g.
CAT5E UTP LSZH 305 M (UTP)
CAT5E FTP LSZH 305 M (FTP)
305 m, 333 yds cable
Ethernet hub e.g. FL HUB 10BASET
standard Ethernet cable
RJ45
XCITE/XA crossover adaptor
order separately (XCITE/XA/5
pack of 5)
RJ45
or direct connect to an IQ3 or EINC
IQView (standard version) only
either connect to an Ethernet
hub
use standard Ethernet
cable
SHEET 2: Installation Instructions
WARNING
Do not attempt to supply power
through the RS232 connector (as
is done with NDP). This will
damage the unit.
!
2.1 Installation - Mounting
(continued)