Teledyne LeCroy QPHY-SATA - Manual (Page 19)

QPHY-SATA Software Option
915745 Rev G
19
3. In the SASTracer software, click Record  Recording Options. Click the Recording Rules tab and
Configure Bus Analyzer to start acquisition/trigger on event: SATA FIS  BIST Activate, as follows:
4. Close the Recording Options window and click Record  Start. Then, click Generate  Start Generation.
When the recording triggers, the SASTracer has sent the BIST Activate FIS. At this point, the PUT should be
generating the test pattern specified in the traffic generation file.