Teledyne LeCroy QPHY-MIPI-DPHY - Manual (Page 26)

26
918841 Rev A
QPHY-MIPI-DPHY TEST DESCRIPTIONS
The test descriptions for the QPHY-MIPI-DPHY tests can be found in the MIPI Alliance Test Program D-PHY
Physical Layer Conformance Test Suite Version 1.00. As of October 4
th
, 2010 this document can be found at the
following address which is accessible to members of the MIPI Alliance only:
https://members.mipi.org/mipi-testing/files/UNH-IOL/UNH-IOL%20Test%20Suite%20Documents/DPHY/MIPI_D-
PHY_Conformance_Test_Suite_(v1.00).pdf
The tests that are included in QPHY-MIPI-DPHY are:

Eye Diagrams
o Dp
o Dn
o Ddiff
o CLKp
o CLKn
o CLKdiff

HS Tests
o Data Lane HS Bitrate and UI
o VOD(1,0) (Clock and Data)
o dVOD(1,0) (Clock and Data)
o VOHHS (Clock and Data)
o VCMTX(1,0) (Clock and Data)
o dVCMTX(1,0) (Clock and Data)
o TR / TF (Clock and Data)
o dVCMTX(hf) and dVCMTX(lf) (Clock and Data)
o TLPX (Clock and Data)
o THS-Prepare (Data Only)
o THS-Prepare+THS-Zero (Data Only)
o THS-Trail (Data Only)
o THS-Exit (Clock and Data)
o TEOT (Clock and Data)
o TREOT (Clock and Data)
o TCLK-Trail (Clock Only)
o TLK-Prepare (clock Only)
o TCLK-Prepare+TCLK-Zero (Clock Only)
o TCLK-Pre (Clock to Data Timing)
o TCLK-Post (Clock to Data Timing)
o First Bit (Clock to Data Timing)
o TSkew (Clock to Data Timing)