Teledyne LeCroy QPHY-MIPI-DPHY - Manual (Page 20)

20
918841 Rev A
QPHY-MIPI-DPHY TEST CONFIGURATIONS
Configurations include variable settings and limit sets as well, not just test selections. See the QPHY-MIPI-DPHY
Variables section for a description of each variable value and its default value.
Dp-Dn-CLKp-CLKn LP tests (4 Probes)
This configuration will run all of the LP tests. The limit set in use is Default. All of the variables are set to their
default settings.
Dp-Dn-CLKp-CLKn HS tests (4 Probes)
This configuration will run all of the HS tests. The limit set in use is Default. All of the variables are set to their
default settings.
Dp-Dn-CLKp-CLKn Eye Diagram tests (4 Probes)
This configuration will run all of the Eye Diagram tests. The limit set in use is Default. All of the variables are set
to their default settings.
Demo of all conformance tests
This configuration will run all of the conformance tests. The limit set in use is Default. All of the variables are set
to their default settings except that Use Saved Waveforms is set to Yes.
Demo of debug tests
This configuration will run all of the Eye Diagram tests. The limit set in use is Default. All of the variables are set
to their default settings except that Use Saved Waveforms is set to Yes.