Teledyne LeCroy Verification Script Engine (VSE) Manual - Manual (Page 49)

Teledyne LeCroy Verification Script Engine Reference Manual
Page 49 of 115
8.12 SendDirection()
This function specifies more precise tuning for sending events only for a specified direction of the link.
Format:
SendDirection (direction)
Parameters:
direction Can have one of the following values:
Primitive Values
Constant Direction
_IN
Direction is from Host to Device (value = 2)
_OUT Direction is from Device to Host (value = 3)
_ANY Any Direction
If this parameter parameter is omitted, trace events of all directions are sent, which is the same as:
SendTraceEvent(_ANY);
Example:
SendBusState(_IN); # Send events that were transmitted from Host to Device.
SendBusState(); # Send events in all directions.
SendBusState(_ANY); # Send events in all directions.