Teledyne LeCroy Verification Script Engine (VSE) Manual - Manual (Page 43)

Teledyne LeCroy Verification Script Engine Reference Manual
Page 43 of 115
8.6 DontSendChannel()
This function specifies that events occuring on a specified channel should NOT be sent to the script.
Format:
DontSendChannel (channel)
Parameters:
channel Can be one of following values:
_USB2: USB2 traffic (value = 1)
_USB3_RX: USB3 Host Receive traffic (Upstream, value = 2)
_USB3_TX: USB3 Host Transmit traffic (Downstream, value = 3)
Example:
DontSendChannel(_USB3_TX); # DO NOT send events from USB3 downstream channel.
…
DontSendChannel(_CHANNEL_2); # DO NOT send events from channel 2 (USB3_RX).
DontSendChannel(_CHANNEL_3); # DO NOT send events from channel 3 (USB3_TX).
…
DontSendChannel(2); # DO NOT send events from channel 2 (USB3_RX).
DontSendChannel(3); # DO NOT send events from channel 3 (USB3_TX).
…