Teledyne LeCroy Verification Script Engine (VSE) Manual - Manual (Page 35)

Teledyne LeCroy Verification Script Engine Reference Manual
Page 35 of 115
7.1 Packet Level Events
The table below describes the current list of packet level (lowest level of transactions) events and values
(application-defined constants) for in.TraceEvent:
Types of packets
in.TraceEvent
USB2 packet events
All USB2 packet events _USB2_PACKET
USB2 Bus conditions _USB2_BUS_CONDITION
USB2 Start Of Frame packets _USB2_SOF
USB2 Token packets _USB2_TOKEN
USB2 Data packets _USB2_DATA
USB2 Handshake packet _USB2_HSK
USB2 SPLIT packets _USB2_SPLIT
USB Full Speed Hub prefix packets _USB2_PRE
USB2 Link Power Management extended token _USB2_LPM
All other USB2 packets _USB2_OTHER
USB3 packet events
All USB3 packet events _USB3_PACKET
TSEQ Training Sequence Ordered Sets _USB3_TSEQ
TS1 Training Sequence Ordered Sets _USB3_TS1
TS2 Training Sequence Ordered Sets _USB3_TS2
Low Frequency Periodic Signaling _USB3_LFPS
Interpacket Symbols _USB3_IPS
Link Commands _USB3_LINK_CMD
SKIP Sequences _USB3_SKP_SEQ
Logical Idle Symbols _USB3_SYMBOL_IDLE
Isochronous Timestamp packets _USB3_ITP_PKT
Link Management packets _USB3_LMP_PKT
Transaction packets _USB3_TP_PKT
Data Packets _USB3_DP_PKT
Data Packet headers _USB3_DPH_PKT (only for traces before
software version 3.71)
Data payload packets _USB3_DPP_PKT (only for traces before
software version 3.71)
Termination State _USB3_TERM_STATE
LTSSM State _USB3_LTSSM_STATE
Compliance Packet _USB3_CP
All other USB3 packets _USB3_OTHER_PKT