Teledyne LeCroy Verification Script Engine (VSE) Manual - Manual (Page 47)

Teledyne LeCroy Verification Script Engine Reference Manual
Page 47 of 115
8.10 SendTraceEventOnly()
This function specifies that ONLY the event specified in this function is sent to the script.
Format:
SendTraceEventOnly(event)
Parameters:
event See SendTraceEvent() for all possible values
Remark:
This function may be useful, when there are many events to be sent, to send only one kind of event and not
send the other ones.
Example:
…
SendTraceEvent(_PACKET); # Send all packets.
…
if(SomeCondition)
{
SendTraceEventOnly (_USB2_TOKEN);
# Only Token packets are sent.
}