Teledyne LeCroy Verification Script Engine (VSE) Manual - Manual (Page 42)

Teledyne LeCroy Verification Script Engine Reference Manual
Page 42 of 115
8.5 SendChannelOnly()
This function specifies that ONLY events occuring on a specified channel should be sent to the script.
Format:
SendChannelOnly(channel)
Parameters:
channel Can be one of following values:
_USB2: USB2 traffic (value = 1)
_USB3_RX: USB3 Host Receive traffic (Upstream, value = 2)
_USB3_TX: USB3 Host Transmit traffic (Downstream, value = 3)
Example:
SendChannelOnly (_USB2); # Send ONLY events from USB2 channel.
…
SendChannelOnly (_CHANNEL_2); # Send ONLY events from channel 2(USB3_RX).
SendChannelOnly (_CHANNEL_3); # Send ONLY events from channel 3(USB3_TX).
…
SendChannelOnly (2); # Send ONLY events from channel 2 (USB3_RX).
SendChannel Only (3); # Send ONLY events from channel 3 (USB3_TX).
…