Teledyne LeCroy ZD1500 - Manual (Page 12)

ZD500, ZD1000, ZD1500
6 921921-00 Rev A
Leads
While longer leads provide greater flexibility when connecting the probe to a
circuit, the added inductance may degrade the fidelity of high frequency signals.
Short and Long Right Angle
Lead This lead has a socket on one end and a square pin
on the other to connect to the input or ground
socket of the probe body, and may be used for
general purpose probing or can be connected to
the Mini-Grabber or Micro-Grabber accessories.
Y Lead Adapter This lead is used for both ground and input lead
simultaneously. It has two sockets on one end and
two square pins on the other and may be used for
general purpose probing. Resistive compensation
to reduce inductive peaking is included.
Solder-In Lead This lead can be soldered directly to the test
points for a secure probe connection.
Small IC Adapter The Small IC adapters are designed for probing the
leads of an IC. One side is insulated to prevent
shorting one pin to the adjacent pin. The IC
adapters can probe between IC legs with a width
as narrow as .010” up to .100”. Resistive
compensation to reduce inductive peaking is
included.