Teledyne LeCroy ZD1500 - Manual (Page 10)

ZD500, ZD1000, ZD1500
4 921921-00 Rev A
Features and Accessories
The ZD Series probes are provided with numerous features and accessories to
make probing and connecting to different test points easier than ever.

The small, low mass probe head is designed for ease of use and high
performance.

The probe tip socket fits easily onto 0.025 inch square pins for direct
access to test points. Several different adapters are available which
connect directly in the probe socket.

The ground socket will accept several different ground leads to provide a
short ground path for low noise susceptibility.
Tips
Straight Tip The straight tip is rugged and designed for general
probing. Fits in either probe socket.
Swivel Tip Adapter The swivel tip adapter is designed for multi-purpose
browsing and features adjustable tip spacing to reach
test points .300” apart with Z-axis compliance. Resistive
compensation to reduce inductive peaking is included.
Tip Saver To prevent excessive wear on the probe input leads, it
is recommended to use tip saver in most probing
scenarios. The tip saver offers full system bandwidth
and will not degrade signal under test.
Micro- and Mini-Grabbers
The micro- and mini-grabbers are ideal for connecting
to small IC legs or pins very tightly spaced.