Teledyne LeCroy ZS2500 - Manual (Page 11)

Operator’s Manual
Tips
Straight Tip The straight tip is rugged and designed for general
probing. Fits in either probe socket. (PK-ZS-001)
IC Lead Tip The IC Lead Tip is covered in insulation on all sides
(except for a small edge), this tip was designed to
prevent shorting neighboring IC leads. The gold part
of the tip is not insulated and should touch the IC lead
to be tested. It is one-size-fits-all and will work with
any IC lead pitch. Fits in either probe socket. (PACC-
PT003)
Bent Tip The Bent Tip is made out of titanium, this tip is ideal
for situations that require the user to hold the probe
parallel to the circuit board under test. Also gives you
more control when holding the probe like a pencil.
Fits in either probe socket. (PACC-PT005)
Pogo Tip The pogo tip provides z axis compliance. The tip can
fit into a socket or via and onto an IC leg.
924282-00 Rev A 5