Calibration, Cleaning, Abnormal conditions – Teledyne LeCroy WaveExpert 9000_NRO9000_SDA100G Getting Started Manual User Manual
Page 13: Waveexpert getting started guide

WaveExpert Getting Started Guide
WE-GS-E Rev A
ISSUED: September 2005
11
Calibration
The recommended calibration interval is one year. Calibration should be performed by qualified
personnel only.
Cleaning
WARNING
No operator serviceable parts inside. Do not
remove covers.
Refer servicing to qualified personnel.
Clean only the exterior of the scope, using a
damp, soft cloth. Do not use chemicals or
abrasive elements. Under no circumstances
allow moisture to penetrate the instrument. To
avoid electrical shock, unplug the power cord
from the AC outlet before cleaning.
Abnormal Conditions
WARNING
Any use of the scope in a manner not specified
by the manufacturer may impair the
instrument’s safety protection. The scope and
related accessories should not be directly
connected to human subjects or used for
patient monitoring.
Operate the scope only as intended by the
manufacturer.
If you suspect the scope’s protection has been
impaired, disconnect the power cord and
secure the instrument against any unintended
operation.
The scope’s protection is likely to be impaired
if, for example, the instrument shows visible
damage or has been subjected to severe
transport stresses.
Proper use of the scope depends on careful
reading of all instructions and labels.