Cd player operation – Aiwa CDC-Z137 User Manual
Page 5

ENGLISH
4
ENGLISH
4
Presetting stations manually
(Manual Memory)
1
Press TU (TUNER) repeatedly to select the desired
band (FM1, FM2, FM3, AM1, or AM2).
2
Press + or – to tune in to a desired station (see
“Tuning in to a station” as well for another tuning
method).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.
Tuning in to a preset station
1
Press TU (TUNER) repeatedly to select the desired
band (FM1, FM2, FM3, AM1 or AM2).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
CD PLAYER OPERATION
Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
SHUF
Jog dial (PUSH-SOURCE)
REP1
INT
t/g, r/f
z
1
Insert a CD.
CD indicator appears on the display.
CD play starts.
If a CD is already inserted, press Jog dial (PUSH-
SOURCE) repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
Track number
Elapsed playing time
CD indicator
Note
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data is inserted, “E03” will
appear in the display. The unit cannot play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
“INTRO” appears on the display.
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1
Press REP1 during CD play.
“REP1” appears on the display.
To cancel One track Repeat Play, press REP1 again.
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
Press
z
t/g
r/f
Press and hold r/f
or t/g until you find
the point.