AT&T CL83201 - Manual (Page 56)

Multiple handset use
50
Push-to-talk (PTT)
Make an outgoing call during �TT call
During a one-to-one PTT call, press �HONE/
FLA�H
on your handset or
/��EA�ER on your telephone base to get a dial tone. The PTT call
ends automatically.
During a PTT call to multiple devices, press
�HONE/
FLA�H
on the
initiating handset or /��EA�ER on the initiating telephone base. The
PTT call ends automatically and you get a dial tone.
During a PTT call to multiple devices, press
�HONE/
FLA�H
on any one
of the destination handsets or press /��EA�ER on the destination
telephone base. That device gets a dial tone. The PTT call continues for
the rest of the PTT participants.
End or leave a �TT call
For one-to-one PTT calls, both initiating and destination devices can end the
PTT call. For PTT calls to multiple devices, the initiating device can end the
PTT call. If any one of the destination devices leaves the PTT call, the call
continues until all participants or the initiator hangs up.
Press OFF/
CANCEL
on the handset or place the handset in the telephone
base or charger, or press CANCEL on the telephone base. The screen shows
�ush to talk Ended.
NOTE: After �U�H TO TAL� on the handset or �TT on the telephone base is released, the
PTT call remains open for a short time. If no one presses
�U�H TO TAL� on the handset or
�TT on the telephone base within 10 seconds, the PTT call ends automatically.
•
•
•