AT&T CL83201 - Manual (Page 33)

27
Telephone settings
Telephone base settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps below to turn the
CID time sync feature on or off. The default setting is On.
1. When the handset is in idle mode, press
MENU/
�ELECT
to enter the main menu.
2. Press q CID
or p DIR
to scroll to >�ettings, then press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to scroll to >CID time sync, then
press
MENU
/�ELECT.
4. Press q CID
or p DIR
to highlight >On or >Off, then
press
MENU
/�ELECT to save. There is a confirmation
tone and the screen returns to the previous menu.
Home area code
If you dial 7 digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a
call from within your home area code, the caller ID history only displays the
7 digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only 7 digits.
To set the home area code:
1. Press
MENU/
�ELECT
in idle mode to enter the main menu.
2. Use q CID
or p DIR
to scroll to >�ettings, then press
MENU
/�ELECT.
3. Use q CID
or p DIR
to scroll to >Home area code, then
press
MENU
/�ELECT. The screen briefly shows
Only for 7 digit dial from CID.
4. Use the dialing keys to enter a 3-digit home
area code.
Press X/DELETE to delete a digit.
Press and hold X/DELETE to delete all digits.
5. Press
MENU
/�ELECT to save. There is a confirmation
tone and the screen shows Area code will not show in CID briefly before
returning to the previous menu.
NOTE: If in the future, your telephone service provider requires you to dial 10 digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold
X/DELETE until the digits are deleted, and then press
MENU
/�ELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
•
•
Key tone
>CID time sync
p
q
CID TIME SYNC
>On
p
q
CID time sync
>Home area code
p
q
HOME AREA CODE
___