AT&T CL83201 - Manual (Page 50)

Multiple handset use
44
Push-to-talk (PTT)
You can directly broadcast messages to the speakerphone of
any device. Press and hold
�U�H TO TAL� on a handset or �TT
on the telephone base to begin two-way communication.
Only one device can talk at a time. While talking to another
device, press and hold
�U�H TO TAL� on the handset or
�TT on the telephone base.
You must release
�U�H TO TAL� on the handset or �TT on
the telephone base, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices
cannot use the intercom feature but can access the
answering system.
When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows
Not available at this time.
Turn �TT on or off
Using a cordless handset:
1. Press
�U�H TO TAL� when the handset is not in use. The
�U�H TO TAL� menu displays.
2. Press q
CID
or p
DIR
to highlight >�TT On/Off, then press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to choose >On or >Off, then press
MENU
/�ELECT.
Using the telephone base:
1. Press
�TT when the telephone base is not in use. The
�U�H TO TAL� menu displays.
2. Press q
CID
or p
DIR
to highlight >�TT On/Off, then
press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to choose >On or >Off, then press
MENU
/�ELECT.
NOTE: The handset or the telephone base screen displays No Incoming �TT when PTT is
turned off.
•
•
•
•
•
�TT
PUSH TO TALK
>PTT On/Off
p
q
PUSH TO TALK
>PTT On/Off
p
q