AT&T CL83201 - Manual (Page 27)

21
Telephone settings
Telephone base settings
Ringer volume
You can set the ringer volume level to one of six levels or
turn the ringer off. When the ringer is off,
appears on
the screen.
1. Press MENU/
�ELECT
in idle mode to enter the
main menu.
2. Use q CID
or p DIR
to scroll to >Ringers, then press
MENU
/�ELECT .
3. Press
MENU / �ELECT again to select >Ringer volume.
4. Press q
CID
or p
DIR
to sample each volume level.
5. Press
MENU
/�ELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
NOTES:
The telephone base ringer volume also determines the ringer vol ume for intercom calls.
If the ringer volume is set to off, the telephone base is silenced for all incoming calls.
If the ringer volume is set to off, caller ID will not be announced and
Caller ID won’t be announced displays briefly on the screen.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/
�ELECT
in idle mode to enter the
main menu.
2. Use q CID
or p DIR
to scroll to >Ringers, then press
MENU
/�ELECT .
3. Press q
CID
or p
DIR
to scroll to >Ringer tone, then
press
MENU
/�ELECT .
4. Press q CID
or p DIR
to sample each ringer tone.
5. Press
MENU
/�ELECT to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
•
•
•
> Ringer tone
Ringer volume
p
q
RINGER TONE
> Tone 1
p
q
> Ringer volume
RINGER VOLUME
p
q
Ringer tone
p
q
>Ringers
Intercom
p
q