AT&T CL83201 - Manual (Page 54)

Multiple handset use
48
Push-to-talk (PTT)
Answer a �TT call
You can respond to a PTT call as described below.
When your device receives a PTT call, it beeps and shows
�ress and hold [�TT] to talk.
When the other party is speaking, your speakerphone light is on, and your
device shows:
�TT From H� X To H� X (the first X represents the initiating handset
number, and the second
X represents your handset number; a
maximum of four handset numbers appear).
-OR-
�TT From H� X To Base & H� X (the first X represents the initiating
handset number, and the second
X represents your handset number;
a maximum of three handset numbers appear).
-OR-
�TT From Base To H� X (the X represents your handset number; a
maximum of five handset numbers appear).
When your speakerphone light is off (the screen shows
�ress and hold [�TT] to talk), press and hold �U�H TO TAL� on your
handset or
�TT on your telephone base. You will hear a chirp. Speak
towards the device.
While you are speaking, your device shows �TT To Handset: X
( X represents the handset numbers of one or more destination handsets;
a maximum of five handset numbers appear) or
�TT To Base & Handset: X (X represents the handset numbers of one or
more destination handsets; a maximum of four handset numbers appear) .
Your voice is broadcast to all destination devices.
After speaking, release �U�H TO TAL� on your handset or �TT on
your telephone base. Your device will beep. After the beep, if your
speakerphone light is off, you can press and hold
�U�H TO TAL� on
your handset or �TT on your telephone base to continue speaking, or the
destination device can respond.
1.
2.
•
•
•
3.
•
•