Cased drives – LEESON Chassis Mount Regenerative Control: 175721.00 User Manual
Page 27

21
Operation
Cased drives
1. Set the FORWARD / BRAKE / REVERSE switch to BRAKE.
2. Set the speed adjust potentiometer to minimum (full CCW).
3. Apply AC line voltage.
4. Set the POWER switch to the “ I ” (ON) position.
5. Set the FORWARD / BRAKE / REVERSE switch to the
desired direction of rotation.
7. Slowly advance the speed adjust potentiometer clockwise
(CW). The motor will accelerate as the potentiometer is
turned CW. Continue until the desired speed is reached.
8. To brake the motor, set the FORWARD / BRAKE /
REVERSE switch to the BRAKE position. To coast the
motor to a stop, set the POWER switch to the “ 0 ” (OFF)
position.
9. To reverse direction:
a. Set the FORWARD / BRAKE / REVERSE switch to
BRAKE.
b. After the motor comes to a complete stop, set the
FORWARD / BRAKE / REVERSE switch to the desired
direction of rotation.
10. Set the POWER switch to “ 0 ” (OFF) to remove power
from the drive.