LEESON Micro Series Compact Inverters - Manual (Page 32)

30
The following table shows the possible DRIVE STATUS indications that can appear on the drive display:
DRIVE STATUS TABLE
DISPLAY DESCRIPTION
STOP Drive is in STOP mode - No output to the motor .
RUN Drive is in RUN mode and is within +/- 3 Hz of the speed set point.
FAULT Drive has shut down due to a FAULT condition . If the fault condition has
passed, pressing the STOP key will clear the fault and return the drive to the
STOP mode .
LOCK Drive is in FAULT LOCKOUT due to five unsuccessful restart attempts .
BRAKE DC BRAKE is energized.
LIMIT Drive is in CURRENT LIMIT due to an overloaded motor, or ACCEL is too
fast .
FDEC Drive is in DECEL FREEZE because DECEL is too fast .