AMX Modero ViewPoint MVP-8400 - Manual (Page 80)

Setup Pages
66 MVP Modero ViewPoint Touch Panels
Wireless Settings
The options on the Wireless Security: Simple Mode and Wireless Security: Enterprise Mode windows
allow you to select from the wireless security methods supported by the NXA-WC80211GCF Wi-Fi
card. These security methods incorporate WPA, WPA2, and EAP technology (some of which require the
upload of unique certificate files to a target panel).
Refer to the Appendix B - Wireless Technology section on page 185 for more further information.
Some encryption and security features may/may not be supported depending on the type of wireless card
being used:
Refer to the Configuring a Wireless Network Access section on page 21 for more information on
configuring the panel for wireless network access using the various security options.
Wireless Security: Enterprise Mode (Cont.)
Password: Press this field to enter a password for wireless access in the Password
keypad. (NOTE: this field is greyed out when selecting EAP-TLS as a Security
Type.)
Certificate Authority: Press this field to enter the file location for a Certificate Authority certificate in
the Certificate Authority (CA) keypad.
PEAP Version: This field is only enabled when selecting EAP-PEAP as a Security Type. Press
this field to cycle between the available installed versions of PEAP.
Inner Auth. Type: This field is only enabled when selecting EAP-PEAP or EAP-TTLS as a
Security Type. Press this field to cycle between MSCHAPv2, GTC, OTP, and
MD5.
Client Certificate: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Certificate File Location keypad.
Private key: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Private Key File Location keypad.
Private Key Password: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter the password for the private key in the Private Key Password
keypad.
Auto PAC Provisioning: This field is only enabled when selecting EAP-FAST as a Security Type. Press
this field to enable or disable the use of PAC files.
PAC File Location: This field is only enabled when selecting EAP-FAST as a Security Type, and
only when Auto PAC Provisioning is Disabled. Press this field to enter a file
location in the PAC File Location keypad.
Auto Key Renewal: This field is blocked out, but will read "NEVER" when selecting EAP-FAST as a
Security Type.
Cancel/Save: Press the Cancel button to return to the Wireless Settings Page without saving
any changes. Press the Save button to save all changes and return to the Wire-
less Settings Page.
Wireless Security Support
802.11g Wi-Fi CF card: • Open (Clear Text)
• Static WEP (64-bit and 128-bit key lengths)
• WPA-PSK
• EAP security (with and without certificates)
• WAP SIte Survey