AMX Modero ViewPoint MVP-8400 User Manual
Page 114
Setup Pages
100
MVP Modero ViewPoint Touch Panels
Features on this page include:
Project Information Page
Back:
Saves all changes and returns to the previous page.
WiFi/Wired icon:
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired (image of
three networked computers).
Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of
the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark green
every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
File Name:
Displays the name of the TPDesign4 project file downloaded to the panel.
Designer ID:
Displays the designer information.
File Revision:
Displays the revision number of the file.
Dealer ID:
Displays the dealer ID number (unique to every dealer and entered in TPD4).
Job Name:
Displays the job name.
Sales Order:
Displays the sales order information.
Purchase Order:
Displays the purchase order information.
AMX IR 38K Port:
Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.
• This information is specified in TPD4 (Project Properties > IR Emitters &
Receivers tab).
• For example if you set the AMX IR 38K Port to 7 and then put a button on the
panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot 5
of the AMX IR 38K Port.
AMX IR 455K Port:
Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.
IR User Def 1 Port:
Displays the User Defined IR channel port used by the IR Emitter on the panel.
• Note: User Defined ports can be downloaded by the user and are customizable,
whereas the AMX ones are fixed.
IR User Def 2 Port:
Displays the User Defined IR channel port used by the IR Emitter on the panel.
Build Number:
Displays the build number information of the TPD4 software used to create the
project file.
Creation Date:
Displays the project creation date.
Revision Date:
Displays the last revision date for the project.
Last Save Date:
Displays the last date the project was saved.
Blink Rate:
Displays the feedback blink rate, in .10 second increments.
Job Comments:
Displays any comments associated to the job (from the TPD4 project file).
Cradle Sensor Port:
Displays the port assignment being used to report Cradle Sensor information.
Cradle Sensor Channel: Displays the channel assignment being used to report Cradle Sensor information.
The channel is turned on when the panel is docked (in either the TDS or WDS
docking stations.
IR receivers and transmitters on G4 panels share the device address number of the
panel.