American Dryer Corp. Phase 5 Microprocessor AD-170 User Manual

Page 24

To Replace Burner Tubes

1. Refer to "Replace Gas Valve"

and follow steps 1 through 6.

2. Remove four (4) screws

securing manifold rest and

remove rest.

3. Remove the screws securing the

front flanges of the burner tubes

to the burner tube rest.

4. Remove the screws securing the

burner tube rest to the oven and

remove this rest.

5. Remove screws securing the sight hole

disk and burner box cover plate to the

oven and remove both of these pieces.

6. Remove burner tubes by sliding them out.

7. Replace by reversing procedure.

WARNING: Test ALL connections for leaks by brushing on a soapy water solution.

NEVER TEST FOR LEAKS WITH A FLAME.