6 automatic measurement start – KANOMAX 3887 Handheld Particle Counter User Manual

Page 40

6-6 Automatic Measurement Start

Measurement will start automatically when the preset time has expired.
Setup procedure is shown below.

Power Up

1.MEASURE MODE
2.DATA PROCESSING
3.OPTIONS

< OPTION >

1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES

DELAY 10 SEC

AUTOSTART: ON

Press PREV key

< OPTION >

1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES

Press the ENTER key to move the cursor to the
next item.
1>0>SEC>ON

Measurement mode changes
each time the ▲▼ key is pressed.

Press ENTER key