beautypg.com
16
4-5 REMOTE Mode
Setup procedure is shown below. (Character positions may not correspond to the actual screen.)
Power Up
1.MEASURE MODE 2.DATA PROCESSING 3.OPTIONS
< MEASURE MODE >
1.REPEAT 4.CALC 2.SINGLE 5.REMOTE 3.CONT 6.ISO>4
Move the cursor by ▲▼key.
Press ENTER key
REMOTE 0.3/0.5/5.0um LOC.021
OK
REMOTE 30B 20:32
0.3 0.00E+0/m3
0.5 0.00E+0/m3
5.0 0.00E+0/m3
Measurement start/stop is controlled by the software supplied with the instrument.
Measurement Setting Screen
LOC.:
LOC number can be used for identifying room numbers or measurements. Setting of this item is not mandatory.
