KANOMAX 3887 Handheld Particle Counter - Manual (Page 36)

29
6-2 Changing Measurement Unit
The procedure for changing the measurement unit is shown below.
Power Up
1.MEASURE MODE
2.DATA PROCESSING
3.OPTIONS
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
Press ENTER key
SETUP
1.PTCL CNT
Press PREV key
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
Change the unit by using the ▲▼ key.
The unit changes in the following sequence.
▲: CNT → /cf → /m 3 → CNT
▼: /m 3 → /cf → CNT → /m 3
Press ENTER key