Ronan X11CA Hardware Manual - Manual (Page 13)

Rev 1.0 Series X11CA Hardware Manual
2. X11CA Hardware Setup
Hardware Control-© 2002 Ronan Engineering 9
The following is the color specification for each X11CA type.
Chassis Type
Bezel Color Lens Holder
X11CA-1000 WB1-( ) LH1
X11CA-2000 WB2-( ) LH2
X11CA-3000 WB3-( ) LH3
X11CA-4000 WB4-( ) LH4
Figure 2-2 Eight Benzel Colors
•
Colored lenses (not suitable for LED displays)
2.1.3 Monalarm Module: Part NO: X11CA-1000
The Monoalarm plug-in Module features single channel alarm logic with two
2-watt incandescent or optional LED type indicators illuminating a 3.00-inch
(76.20 mm) high by 3.00-inch wide window.
NOTE:
Even when a lamp bulb or an LED extinguishes or burns out, the other lamp
bulbs or LEDs remain functioning. The extinguished bulbs or LED can be
replaced without un-plugging the module.
Figure 2-3 Monoalarm plug in module
Module Windows
with Two LEDs
Inspect the hookup wiring to insure conformity with the schematic provided on
the CD. Verify that ME terminals are connected to other ME terminals only.