Ronan X11CA Hardware Manual - Manual (Page 12)

Rev 1.0 Series X11CA Hardware Manual
2. X11CA Hardware Setup
Hardware Control-© 2002 Ronan Engineering 8
LEDS Only Lamps Only
No.1 No.2 No.3 No.4 Chassis
Type Front
Lens
Rear
Lens Front
Lens
Rear
Lens
One
Piece
Lens
Front
Lens
Rear
Lens
X11CA-1000 WL1-C WL1-W1 WL1-C WL1-W2 WL1-( ) WL1-W2 WL1-( )
X11CA-2000 WL2-C WL2-W1 WL2-C WL2-W2 WL2-( ) WL2-W2 WL2-( )
X11CA-3000 WL3-C WL3-W1 WL3-C WL3-W2 WL3-( ) WL3-W2 WL3-( )
X11CA-4d000 WL4-C WL4-W1 WL4-C WL4-W2 WL4-( ) WL4-W2 WL4-( )
Engraving Colors
Black characters for (W) White Translucent lens
(R1) Red Transparent lens
White characters for (R) Red Translucent lens
(G1) Green Transparent lens
White characters for (G) Green Translucent lens
(A1) Amber Transparent lens
Black characters for (A) Amber Translucent lens
(B1) Blue Transparent lens
White characters for (B) Black Translucent lens
2.1.2 Color Coding
•
Eight bezel colors
The bezels are available in eight colors (black, brown, red, yellow,
green, blue, gray and white) to allow distinction of the different system
functions, such as sequence types, first out groups, common alarm
groups, etc.
NOTE:
All lens holders are white colors.