Ransburg RMA Indirect A12869 - Manual (Page 6)

RMA-303 Indirect Charge - Safety
1 LN-9268-11.4
SAFETY PRECAUTIONS
Before operating, maintaining or servicing any
Ransburg electrostatic coating system, read and
understand all of the technical and safety literature
for your Ransburg products. This manual contains
information that is important for you to know and
understand. This information relates to USER
SAFETY and PREVENTING EQUIPMENT PROB-
LEMS. To help you recognize this information, we
use the following symbols. Please pay particular
attention to these sections.
WARNING! states information to alert you to a
situation that might cause serious injury if in-
structions are not followed.
CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
NOTE is information relevant to the procedure
in progress.
While this manual lists standard specifications and
service procedures, some minor deviations may be
found between this literature and your equipment.
Differences in local codes and plant requirements,
material delivery requirements, etc., make such
variations inevitable. Compare this manual with
your system installation drawings and appropriate
Ransburg equipment manuals to reconcile such
differences.
Careful study and continued use of this manual will
provide a better understanding of the equipment
and process, resulting in more efficient operation,
longer trouble-free service and faster, easier trou-
bleshooting. If you do not have the manuals and
safety literature for your Ransburg system, contact
your local Ransburg representative or Ransburg
.
SAFETY
The user MUST read and be familiar with
the Safety Section in this manual and the
Ransburg safety literature therein identified.
This manual MUST be read and thoroughly
understood by ALL personnel who operate,
clean or maintain this equipment! Special care
should be taken to ensure that the WARNINGS
and safety requirements for operating and ser-
vicing the equipment are followed. The user
should be aware of and adhere to ALL local
building and fire codes and ordinances as well
as NFPA-33 SAFETY STANDARD, LATEST
EDITION
, prior to installing, operating, and/or
servicing this equipment.
! W A R N I N G
! W A R N I N G
The hazards shown on the following pag-
es may occur during the normal use of this
equipment. Please read the hazard chart be-
ginning on page 2.