Hauler Racks Universal Steel Truck/Cap Rack (STC3-1) - Manual (Page 8)

8 of 16
HAULER RACKS, INC.
7109 31
st Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Step 7 Front Rail assembly
Slide the front rail through the front legs and line up the bolt holes for 10’ length.
If a shorter length is desired, slide the front rail into the rear rail to the desired position. Mark the holes. Remove
front rail and drill holes. Reinsert the front rail into the rear and line up holes.
Align the bolt holes and secure with (with (2) 3/8”-16 x 2-3/4” bolts, (4) flat washers and (2) 3/8”-16 nylon insert lock
nuts.
Seal the gap between the rails with silicone.
Repeat for other side.
Insert 1-3/4” square end caps into the front rails.