Hauler Racks Universal Steel Truck/Cap Rack (STC3-1) User Manual
Page 15
15 of 16
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Removable rear cross bar pivot continued.
On the end with the 2” outer crossbar, use a 5” bolt with flat washer and slide them through the upper hole of the leg.
Place the crossbar onto the bolt and slide towards the leg.
Secure the crossbar to the leg using a flat washer, split lock washer and wing nut.
Tighten the wing nut enough to flatten the split lock washer.
NOTE: Always check so make sure the wing nut is tight before and during use. If the wing nut loosens,
replace by removing the split lock washer and use a 3/8”-16 nylon insert lock nut.
NOTE: Always have the crossbar secured on both ends when using the vehicle.