Hauler Racks HKRS5-1 User Manual
Page 5

Page 5 of 8
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
5. Leg assembly (continued)
Slide the leg assembly into the ‘T’ bracket as shown. Secure using (2) 3/8”-16 x 2” carriage bolts, 3/8”-16 nuts and a 3/8” split lock washers.
Repeat for other leg.
6. Rack assembly
Place the screen assembly so that the top portion rests on the screen ’L’ bracket installed in the load bar.
Align the 5/16”-18 x 1-1/2” bolts installed in the lower braces with the two holes on the bottom of the screen assembly.
This manual is related to the following products: