Hauler Racks T-12 SERIES RACKS - Manual (Page 8)

6. Install front legs
The front legs can be indentified by the notches in the mounting brackets attached to the bottom of the
legs.
Driver’s side Passenger’s side
Place the front legs into the ‘Y’ brackets so the notches are facing towards the front of the rack.
Use (2) 3/8”-16 x 2” carriage bolts, (2) 3/8” split lock washers and (2) 3/8”-16 nuts to secure the leg to the
‘Y’ bracket. Finger tighten hardware. Repeat for other side. Note the orientation of the carriage bolts so
they face inward.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 8 of 14 WWW.HAULERRACKS.COM