Hauler Racks T-12 SERIES RACKS - Manual (Page 7)

5. Install rear legs
Turn the rack over so the round tubes are on the bottom.
Place the rear legs (legs with un-notched feet) so the ribbed portion faces inwards into the ‘Y’ brackets.
Use (2) 3/8”-16 x 2” carriage bolts, (2) 3/8” split lock washers and (2) 3/8”-16 nuts to secure the leg to the
‘Y’ bracket. Finger tighten hardware. Repeat for other side. Note the orientation of the carriage bolts so
they face inwards.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 7 of 14 WWW.HAULERRACKS.COM