Hauler Racks T-12 SERIES RACKS - Manual (Page 6)

4. Install rear crossbar.
The rear crossbar is the rectangular extrusion with a ribbed bottom and square bolt holes in each end.
Using (4) 3/8”-16 x 2” carriage bolts, (4) 3/8” split lock washers and (4) 3/8”-16 nuts, secure the rear
crossbar to the ‘Y’ brackets mounted at the ends of the rear rails sections. Finger tighten hardware only.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 6 of 14 WWW.HAULERRACKS.COM