Hauler Racks TRANSIT CONNECT RACK User Manual
Page 7
6. Install rear crossbar.
The rear crossbar is the smooth rectangle tube with the round bolt holes in each end.
Using (4) 3/8”-16 x 2” carriage bolts, (4) 3/8” split lock washers and (4) 3/8”-16 nuts, secure the rear crossbar to
the ‘H’ brackets mounted at the ends of the rear rails sections. Finger tighten hardware only.
HAULER RACKS, INC.
Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 7 of 10 WWW.HAULERRACKS.COM