Hauler Racks TRANSIT CONNECT RACK - Manual (Page 4)

2. Leg assembly
Assemble G-mount hinge to curved mount arm by placing the (2) 5/16”-18 x 1” carriage bolts as shown through the
curved mounting arm and G-mount hinge.
Secure and tighten the curved G-mount arm to the G-mount hinge with (2) 5/16” split lock washer and (2) 5/16”-18 nut.
Repeat for remaining G-mount hinges.
3. Crossbar assembly
Remove the (4) 3/8” split lock washers and (4) 3/8”-16 nuts from the middle crossbar assemblies. Loosely attach the
G-mount assembly to the ribbed crossbars using (2) 3/8” split lock washers and (2) 3/8”-16 nuts for each G-mount.
Repeat for other end.
Repeat for remaining ribbed crossbars.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 4 of 10 WWW.HAULERRACKS.COM