Hauler Racks TRANSIT CONNECT RACK - Manual (Page 2)

1. Connect front and rear sections
Each side rail side contains a front and rear section preassembled for easier assembly. The front and rear
sections are banded together.
Remove the banding and separate the front and rear rail sections from packaging.
On a flat surface, place boards under the front and rear rail sections as shown so that the rear ‘H’ bracket does
not touch the ground. This will make aligning the front and rear rail sections faster.
Insert the front rail section into the 5” bracket mounted on the rear rail section and line up the holes.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 2 of 10 WWW.HAULERRACKS.COM